Hernon Conformal Coating 739 Technical Data Sheet

11年3月22日 9:57 | anndi | 1

Product Description

Hernon Conformal Coating 739 is formulated to provide high performance and rapid cure. Conformal Coating 739 will provide an excellent bond, high light transmittance and a refractive index similar to glass. Exposure to high intensity UV light will cure the coating to a hard, dry surface.

Product Benefits

• Easy to use.
• Cost effective.
• Single component, no mixing.
• 100% solid system (no solvents).
• Short cure cycles.

Typical Properties (Uncured)

Property Value

Resin Modified acrylic

Appearance Clear liquid

Viscosity @ 25ºC, cP 100 to 300

Specific gravity 1.11

Flash point See MSDS

Typical Properties (Cured)

Property Value

Coefficient of thermal expansion, ASTM D696 (K-1) 0.1

Refractive Index 1.54

Light transmittance, % 95

Maximum Gap Fill, in. 0.003

Temperature range, °F -65 to 250

Typical Curing Performance

Cure Characteristics

The following factors can affect cure rates.

• Dark surfaces lengthen cure time.
• Full range (UV-A, B, & C) lamps provide faster cures than filtered sources.
• All UV sources degrade with use. Check output with a radiometer.
• Thicker films require longer cures.
• Light intensity decreases as distance from UV source increases.
• Some clear plastics may contain UV inhibitors.

Fixture Time

Fixture time is defined as the time to develop a shear strength of 0.1 N/mm².

Light Intensity Fixture Time, secs.

High 5

Low 15

General Information

This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet (MSDS).

Ultraviolet Lamp Precautions

• Never look directly at UV source.
• Wear protective goggles.
• Do NOT expose bare skin to high intensity UV light wear protective clothing.
• Use in a well-ventilated area. Some UV sources generate ozone.
• Provide shielding around high intensity UV sources
• High intensity UV sources generate heat. Take appropriate precautions.

Storage

Conformal Coating 739 should be stored in a cool, dry location in unopened containers at a temperature between 46ºF to 82ºF (8ºC to 28ºC) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused material, do not return any material to its original container.

Dispensing Equipment

Hernon offers a complete line of semi and fully automated dispensing and curing equipment. Contact Hernon Sales for additional information.

点击下载附件：

HERNON 739 (83.0 KB, 6 次)
您没有权限下载此文件。