《Henkel AG & Co KGaA : Henkel Presents ‘Fusion Coating’ at ZOW Fair》：
ENP Newswire – 02 January 2014
Release date- 27122013 – Henkel will be presenting its extended portfolio of products and solutions for the wood and furniture industry – including the recently developed ‘Fusion Coating’ process – at ZOW 2014 in Bad Salzuflen, Germany, from February 10 to 13.
High-gloss laminates are becoming a major trend, and not just in the furniture industry. The ‘Fusion Coating’ process is an innovative surface coating concept for the decorative treatment of melamine faced panels.
In ‘Fusion Coating,’ the UV-curing hotmelt Technomelt CHS 370 UV is applied directly to the melamine faced panels where it acts as a primer for one or several further coats of lacquer that ultimately create the desired high-gloss effect. Thanks to its good adhesion on melamine, its flexibility and its ready compatibility with UV lacquers matched to the system, Technomelt CHS 370 UV provides the ideal basis for the creation of high-gloss finishes.
Henkel and Cefla Group to jointly market ‘Fusion Coating’
Traditional technologies for generating high-gloss effects are simply inferior to ‘Fusion Coating.’ Applying a high-gloss film laminate to wood based panels tends to be very expensive. And the use of paints and varnishes on melamine faced panels is also problematic because the primers used offer not more than poor adhesion on melamine and are not as flexible as a UV-curing hotmelt.
Henkel is marketing the ‘Fusion Coating’ process in harness with Italian finishing line constructor Cefla Group and manufacturers of lacquers and varnishes that are ideally coordinated with the system.
Fewer coats of lacquer plus less danger of cracking
The UV hotmelt forms a flexible layer with just one application, reducing the number of lacquer coats required versus conventional processes. This also diminishes the likelihood of cracking resulting from dimensional changes in the particle board substrate. With the use of melamine faced panels as the base, producers have access to a wide range of decors.
Technomelt CHS 370 UV is roller-applied. As the working temperature lies between just 90 -degreeC and 100 -degreeC, the process is also energy-efficient. Further cost savings accrue due to the fact that the UV hotmelt cures immediately, allowing the workpiece to move directly to the next process. Technomelt CHS 370 UV is also free from volatile organic compounds (VOC), thus benefiting in-plant occupational health and safety.
Henkel specialists available to support production start-up
Henkel’s experts will be present at the fair in Hall 20, Booth D50. They will also be glad to provide in-plant advice and support to customers and their partners during any production start-up with Technomelt CHS 370 UV.
Contact:
Holger Elfes
Tel: +49-(0)211-797-9933
Fax: +49-(0)211-798-9832
Lisa Kretzberg
Tel: +49-(0)211-797-5672
Fax: +49-(0)211-798-9832
[Editorial queries for this story should be sent to newswire@enpublishing.co.uk]
((Comments on this story may be sent to info@enpublishing.co.uk))
《Henkel AG & Co KGaA : Henkel Presents ‘Fusion Coating’ at ZOW Fair》：
ENP Newswire – 02 January 2014
Release date- 27122013 – Henkel will be presenting its extended portfolio of products and solutions for the wood and furniture industry – including the recently developed ‘Fusion Coating’ process – at ZOW 2014 in Bad Salzuflen, Germany, from February 10 to 13.
High-gloss laminates are becoming a major trend, and not just in the furniture industry. The ‘Fusion Coating’ process is an innovative surface coating concept for the decorative treatment of melamine faced panels.
In ‘Fusion Coating,’ the UV-curing hotmelt Technomelt CHS 370 UV is applied directly to the melamine faced panels where it acts as a primer for one or several further coats of lacquer that ultimately create the desired high-gloss effect. Thanks to its good adhesion on melamine, its flexibility and its ready compatibility with UV lacquers matched to the system, Technomelt CHS 370 UV provides the ideal basis for the creation of high-gloss finishes.
Henkel and Cefla Group to jointly market ‘Fusion Coating’
Traditional technologies for generating high-gloss effects are simply inferior to ‘Fusion Coating.’ Applying a high-gloss film laminate to wood based panels tends to be very expensive. And the use of paints and varnishes on melamine faced panels is also problematic because the primers used offer not more than poor adhesion on melamine and are not as flexible as a UV-curing hotmelt.
Henkel is marketing the ‘Fusion Coating’ process in harness with Italian finishing line constructor Cefla Group and manufacturers of lacquers and varnishes that are ideally coordinated with the system.
Fewer coats of lacquer plus less danger of cracking
The UV hotmelt forms a flexible layer with just one application, reducing the number of lacquer coats required versus conventional processes. This also diminishes the likelihood of cracking resulting from dimensional changes in the particle board substrate. With the use of melamine faced panels as the base, producers have access to a wide range of decors.
Technomelt CHS 370 UV is roller-applied. As the working temperature lies between just 90 -degreeC and 100 -degreeC, the process is also energy-efficient. Further cost savings accrue due to the fact that the UV hotmelt cures immediately, allowing the workpiece to move directly to the next process. Technomelt CHS 370 UV is also free from volatile organic compounds (VOC), thus benefiting in-plant occupational health and safety.
Henkel specialists available to support production start-up
Henkel’s experts will be present at the fair in Hall 20, Booth D50. They will also be glad to provide in-plant advice and support to customers and their partners during any production start-up with Technomelt CHS 370 UV.
Contact:
Holger Elfes
Tel: +49-(0)211-797-9933
Fax: +49-(0)211-798-9832
Lisa Kretzberg
Tel: +49-(0)211-797-5672
Fax: +49-(0)211-798-9832
[Editorial queries for this story should be sent to newswire@enpublishing.co.uk]
((Comments on this story may be sent to info@enpublishing.co.uk))