《Henkel Installs New High-Pressure Resin Transfer Molding (RTM) System in U.S.》：
Henkel’s RTM system enables automotive OEMs and suppliers to test viability of composites for future applications
PR Newswire
MADISON HEIGHTS, Mich., April 8, 2014
MADISON HEIGHTS, Mich., April 8, 2014 /PRNewswire/ — Henkel announced today at the SAE World Congress in Detroit that it is installing a high-pressure Resin Transfer Molding (RTM) system at the company’s North American automotive headquarters in Madison Heights, Mich. The unit, which is expected to be fully operational this quarter, is intended to support Henkel’s Loctite(R) MAX Series and will focus on carbon-fiber and glass-fiber composites.
“To the best of our knowledge, this is the first high-pressure RTM system for a two-component polyurethane in the United States,” said Kevin Roslinski, Henkel Senior Application Engineer, Adhesive Technologies, North America. “Traditionally, most automotive suppliers’ systems are designed for two-component epoxy, not polyurethane which seems better suited for mass production.”
As the automotive industry continues to lightweight its vehicles to meet 2025 CAFE standards for improved fuel economy and reduced CO2 emissions, automakers and suppliers will now have the ability to shoot and test polyurethane in the U.S.
“We invite automotive OEMs and suppliers to come visit us at our Madison Heights facility, so they can quickly – and at no cost – qualify polyurethane properties to see if their composite material is a viable option for future applications,” Roslinski said. “They can come to us with different ideas of orientations of fibers and different weaves they’ve developed and test them out before wasting time and spending money on expensive molds.”
Henkel’s RTM unit has the capability to shoot a two-dimensional, 8-by-11-inch plaque with a 4mm thickness. In the future, the system will have the capability to provide various thicknesses and utilize different inserts for creating class-A surfaces.
Loctite(R) MAX Series Designed for RTM
Henkel’s Loctite(R) MAX composite resin solutions are designed for RTM with glass or carbon fibers, and enable shorter cycle times suitable for automotive mass production.
Both Loctite(R) MAX 2(TM) and Loctite(R) MAX 3(TM) offer a polyurethane-based composite matrix resin that cures significantly faster than the epoxy products usually employed for the RTM process. Due to its low viscosity, the polyurethane resin penetrates and impregnates the fiber material more easily and less harshly, thus enabling shorter injection times to be applied.
Loctite(R) MAX 3(TM) not only contains the resin and hardener but also a high-performance release agent. With the internal release agent ensuring easy detachment of the component from its mold, the resultant surface is of sufficiently high quality to allow immediate painting and bonding. This accelerates the production process and enables manufacture of external and visible components of outstanding surface quality.
Demonstrating ‘Smart Chemistry’ at SAE World Congress
Through hands-on technology demonstrations at the SAE World Congress, booth 415, at Cobo Center in Detroit, April 8-10, 2014, Henkel is showcasing its broad range of solutions developed through smart chemistry – which are sustainable, strong, sound and speedy, and can achieve more than 95 kilograms in mass savings for every vehicle.
Show attendees are testing their smarts and their strength, while Henkel experts are addressing key issues, including lightweighting, joining dissimilar materials, fuel economy, emissions, safety, sustainability, cost reduction, noise reduction, corrosion prevention, sludge reduction, improved stiffness, durability and shorter cycle times. For more information, visit www.henkelna.com/sae.
Henkel in North America
Henkel markets a wide range of well-known consumer and industrial brands in North America, including Dial(R) soaps, Purex(R) laundry detergents, Right Guard(R) antiperspirants, got2b(R) hair gels, and Loctite(R) adhesives. Visit www.henkelna.com for more information.
About Henkel
Henkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Beauty Care and Adhesive Technologies. Founded in 1876, Henkel holds globally leading market positions both in the consumer and industrial businesses with well-known brands such as Persil, Schwarzkopf and Loctite. Henkel employs about 47,000 people and reported sales of $21.8 billion and adjusted operating profit of $3.3 billion in fiscal 2013. Henkel’s preferred shares are listed in the German stock index DAX.
《Henkel Installs New High-Pressure Resin Transfer Molding (RTM) System in U.S.》：
Henkel’s RTM system enables automotive OEMs and suppliers to test viability of composites for future applications
PR Newswire
MADISON HEIGHTS, Mich., April 8, 2014
MADISON HEIGHTS, Mich., April 8, 2014 /PRNewswire/ — Henkel announced today at the SAE World Congress in Detroit that it is installing a high-pressure Resin Transfer Molding (RTM) system at the company’s North American automotive headquarters in Madison Heights, Mich. The unit, which is expected to be fully operational this quarter, is intended to support Henkel’s Loctite(R) MAX Series and will focus on carbon-fiber and glass-fiber composites.
“To the best of our knowledge, this is the first high-pressure RTM system for a two-component polyurethane in the United States,” said Kevin Roslinski, Henkel Senior Application Engineer, Adhesive Technologies, North America. “Traditionally, most automotive suppliers’ systems are designed for two-component epoxy, not polyurethane which seems better suited for mass production.”
As the automotive industry continues to lightweight its vehicles to meet 2025 CAFE standards for improved fuel economy and reduced CO2 emissions, automakers and suppliers will now have the ability to shoot and test polyurethane in the U.S.
“We invite automotive OEMs and suppliers to come visit us at our Madison Heights facility, so they can quickly – and at no cost – qualify polyurethane properties to see if their composite material is a viable option for future applications,” Roslinski said. “They can come to us with different ideas of orientations of fibers and different weaves they’ve developed and test them out before wasting time and spending money on expensive molds.”
Henkel’s RTM unit has the capability to shoot a two-dimensional, 8-by-11-inch plaque with a 4mm thickness. In the future, the system will have the capability to provide various thicknesses and utilize different inserts for creating class-A surfaces.
Loctite(R) MAX Series Designed for RTM
Henkel’s Loctite(R) MAX composite resin solutions are designed for RTM with glass or carbon fibers, and enable shorter cycle times suitable for automotive mass production.
Both Loctite(R) MAX 2(TM) and Loctite(R) MAX 3(TM) offer a polyurethane-based composite matrix resin that cures significantly faster than the epoxy products usually employed for the RTM process. Due to its low viscosity, the polyurethane resin penetrates and impregnates the fiber material more easily and less harshly, thus enabling shorter injection times to be applied.
Loctite(R) MAX 3(TM) not only contains the resin and hardener but also a high-performance release agent. With the internal release agent ensuring easy detachment of the component from its mold, the resultant surface is of sufficiently high quality to allow immediate painting and bonding. This accelerates the production process and enables manufacture of external and visible components of outstanding surface quality.
Demonstrating ‘Smart Chemistry’ at SAE World Congress
Through hands-on technology demonstrations at the SAE World Congress, booth 415, at Cobo Center in Detroit, April 8-10, 2014, Henkel is showcasing its broad range of solutions developed through smart chemistry – which are sustainable, strong, sound and speedy, and can achieve more than 95 kilograms in mass savings for every vehicle.
Show attendees are testing their smarts and their strength, while Henkel experts are addressing key issues, including lightweighting, joining dissimilar materials, fuel economy, emissions, safety, sustainability, cost reduction, noise reduction, corrosion prevention, sludge reduction, improved stiffness, durability and shorter cycle times. For more information, visit www.henkelna.com/sae.
Henkel in North America
Henkel markets a wide range of well-known consumer and industrial brands in North America, including Dial(R) soaps, Purex(R) laundry detergents, Right Guard(R) antiperspirants, got2b(R) hair gels, and Loctite(R) adhesives. Visit www.henkelna.com for more information.
About Henkel
Henkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Beauty Care and Adhesive Technologies. Founded in 1876, Henkel holds globally leading market positions both in the consumer and industrial businesses with well-known brands such as Persil, Schwarzkopf and Loctite. Henkel employs about 47,000 people and reported sales of $21.8 billion and adjusted operating profit of $3.3 billion in fiscal 2013. Henkel’s preferred shares are listed in the German stock index DAX.
Read more: http://www.digitaljournal.com/pr/1837875#ixzz33Agye9pA